14606/4612/4624 IP Telephones Set Up Quick ReferenceComcode: 108747411555-233-229Issue 1, November 2000IMPORTANT USER SAFETY INSTRUCTIONSThe most care
65. Place the other end of the line cord through the round hole in the middle of the stand, and snake it out through the rectangular opening in the ce
7Large Stand Wall-Mounting InstructionsWall Mounting the 4400-Series TelephoneFollow these steps to wall mount a large stand to the 4400-Series teleph
84. Push down on the stand toward the bottom of the telephone, and push the tab on the thinner end of the stand into the slot at the top of the 4400-S
9Wall-Mounting the 4612/4624 IP Telephone with a Large StandFollow these steps to attach the large stand to a 4612 or 4624 IP Series telephone:1. Remo
104. After you have attached the stand to the 4612/4624 IP telephone, use the screw provided to tighten the stand onto the back of the telephone set.
119. Use the notched corner on the back of the stand to fit the cord between the stand and wall.10. If a connection to the Ethernet hub and secondary
2CONSIGNES DE SECURITE IMPORTANTESNous avons porté la plus grande attention au respect des normes de qualité et de sécurité dans la fabrication de ce
3INSTRUCCIONES IMPORTANTES SOBRE LA SEGURIDADPara la fabricación de su nuevo teléfono se han puesto los mayores cuidados posibles a fin de cumplir con
4DC(DSS 4624)optionalfacultatifoptionaleopcional=For all IP Telephone documentation, go to http://support.avaya.comand select Telephone Systems.
1CIB 3199Comcode 108787698Issue 2, November 2000Wall-Mounting Stand for 4400-Series Telephonesand 4600-Series IP TelephonesIMPORTANT SAFETY INSTRUCTIO
2Pre-Installation ChecklistYou can mount all the 4400-Series and 4600-Series telephones except the 4424LD+ on a wall by using the appropriate small or
3Small Stand Wall-Mounting InstructionsWall Mounting the 4400-Series TelephoneFollow these steps to wall mount a small stand to a 4400-Series telephon
44. Push down on the stand toward the top of the telephone, and push the tab on the thinner end of the stand into the slot at the top of the 4400-Seri
5Wall-Mounting the 4606 IP TelephoneFollow these steps to attach the small stand to a 4606 IP telephone:1. Remove the handset hook from the handset cr
Comments to this Manuals