Avaya AA1419074-E6 Datasheet download pdf (Page 25)

Prerequisites

Wear an antistatic wrist strap.

Warning:

Risk of eye injury by laser

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look

into an optical fiber or connector port. Always assume that fiber optic cables are connected to

a light source.

Electrostatic alert:

Risk of equipment damage

To prevent damage from electrostatic discharge, always wear an antistatic wrist strap

connected to an ESD jack.

Procedure steps

1. Disconnect the network fiber optic cable from the SFP connector.

2. Affix dust covers over the fiber optic bore and connector.

3. Depending on your SFP model, to release the SFP, press the locking and extractor

mechanism.

4. Slide the SFP out of the module SFP slot.

If the SFP does not slide easily from the module slot, use a gentle side-to-side

rocking motion while firmly pulling the SFP from the slot.

5. Store the SFP in a safe place until needed.

Important:

If you discard the SFP, be sure to dispose of it according to all national laws and

regulations.

Removing an SFP

Installation — SFPs and XFPs December 2010 25

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

No comments

Avaya AA1419074-E6 Datasheet Page 25