303124-B Rev 00
1-1
Chapter 1
Using the Serial Adapter Module in a BayStack AN
or ANH Router
This chapter supplements Installing an Adapter Module in a BayStack AN or ANH
Router. Follow the hardware installation steps in that manual, then refer to this
document for information specific to the serial adapter module.
Verifying AN/ANH Router Requirements
Table 1-1 shows the minimum versions of boot and diagnostic programmable
read-only memory (PROM) code required for a serial adapter module.
For information on upgrading PROM, see the BayRS
™
Upgrading Routers guide.
Attaching Cables
Connect the communications cable to the 44-pin DSUB connector on the installed
adapter module.
Table 1-1. PROM Diagnostic and Boot Code for AN/ANH Routers
Code Type Minimum Version Directory File Name
Boot 8.12
an_proms anboot.exe
Diagnostic 5.31
an_proms andiag.exe
Comments to this Manuals