Avaya BCM450 Configuration Guide download pdf (Page 7)

AAA; Reviewed:

05/03/2011

Avaya BCM Solutions Test Lab

Application Notes

Reserved.

7 of 12

BCM50_BCM450_R5_Configuration_Verizon

5.0 System Configuration

This section provides procedures for configuring a SIP trunk on BCM Rls. 5.0 to Verizon Business IP network

5.1 BCM Configuration

In order to configure a SIP trunk between BCM and

Verizon Business network, do the following:

5.1.1 IP Trunks Settings Configuration

1. Under Configuration



Resources



Telephony Resources: Select module type “IP Trunks

2. Enable Forward redirected OLI: by click on the check box next to it.

” and

click on the “IP Trunks Settings” tab

5.1.2 SIP Settings Configuration

1. Under Configuration



Resources



Telephony Resources: Select module type “IP Trunks” and

click on the “SIP Settings

2. In the SIP Settings section:

” tab

• Local Domain: The IP address of the Session Border Controller. Obtain this information from

Verizon.

•

Call Signaling Port: This port is defined by Verizon. Obtain this information from Verizon

In RFC2833 section

•

Dynamic Payload: Set this value to 101

4. In the Service Impacting SIP Settings, click on Modify and Disable PRACK. Click OK

5. Leave the rest of parameters under the SIP Settings tab at the default values

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Avaya BCM450 Configuration Guide Page 7