Avaya 4600 Series IP Telephones Application Note download pdf (Page 7)

RL; Reviewed:

WCH 10/22/2004

Solution & Interoperability Test Lab Application Notes

7 of 10

Alpine3808-PoE.doc

Enter the command show inline-power info ports <portlist> to obtain inline power information

for one or more ports. The output of the command displays the inline power state, detected

802.3af class, actual power consumption, and fault state on each specified port.

Alpine3808:275 # show inline-power info ports 5:1-5:16

Port State Class Connect Volts Curr Res Power Fault

History (mA) (Kohms) (Watts)

5:1 delivering class1 1 50.1 62 25.2 3.10 None

5:2 delivering class2 2 50.1 62 25.2 3.20 None

5:3 delivering class2 3 49.8 64 24.8 3.20 None

5:4 delivering class3 4 49.8 138 24.4 6.90 None

5:5 delivering class3 5 49.8 120 24.0 6.00 None

5:6 delivering class3 6 49.8 212 24.0 10.60 None

5:7 delivering class3 7 49.8 106 24.4 5.30 None

5:8 delivering class0 8 49.8 94 24.8 4.60 None

5:9 delivering class0 9 49.8 92 24.4 4.60 None

5:10 delivering class0 10 49.8 98 24.0 4.90 None

5:11 delivering class0 11 49.8 112 25.2 5.60 None

5:12 searching ------ 0 0.0 0 0.0 0.00 None

5:13 searching ------ 0 0.0 0 0.0 0.00 None

5:14 searching ------ 0 0.0 0 0.0 0.00 None

5:15 searching ------ 0 0.0 0 0.0 0.00 None

5:16 searching ------ 0 0.0 0 0.0 0.00 None

For more detailed inline power information for one or more ports, enter the command show

inline-power info detail ports <portlist>.

4. Interoperability Compliance Testing

The interoperability compliance testing focused on verifying PoE interoperability between the

Extreme Networks Alpine 3808 and Avaya 4600 Series IP Telephones and Avaya AP-4/5/6

Wireless Access Points.

4.1. General Test Approach

The general test approach was to connect the Avaya PDs (Avaya 4600 Series IP Telephones and

Avaya AP-4/5/6 Wireless Access Points) to PoE-enabled ports on the Alpine FM-32Pi PoE

Module and verify that the PDs successfully boot. To test repeatability, PoE was then disabled

and enabled again on the connected ports. Lastly, to verify that power and data can be

simultaneously carried on the PoE connections, phone calls were made from the IP Telephones

and an IP Softphone on a wireless laptop accessing the network via the AP-4/5/6.

4.2. Test Results

All test cases completed successfully. The Alpine 3808 equipped with an Alpine FM-32Pi PoE

Module successfully provided inline power to the Avaya PDs. Table 1 below lists the 802.3af

class, allocated power, and measured power of the Avaya PDs when connected to the Alpine

FM-32Pi PoE Module. All of the IP Telephones were in idle/on-hook states.

Avaya 4600 Series IP Telephones Application Note Page 7

Comments to this Manuals

Avaya 4600 Series IP Telephones Application Note Page 7

Comments to this Manuals

Related products and manuals for PoE adapters Avaya 4600 Series IP Telephones