Avaya SoundBrick 500 User Manual Page 1

SoundBrickModel 500 INSTALLATION AND OPERATION MANUAL Quick install instructions on back cover Please leave t

Bandwidth, Switches 2-3 Sets the fidelity of audio messages. There is a trade-off between audio quality and recording time: The higher the audio qu

12VDC power supply (included) 1/8” mini-plug trigger cable (optional) ➨ Connect to trigger hardware mono RCA cable (included) ➨ Connect to phon

Step 3 – Load the tape Messages load into the SoundBrick 500 from a cassette tape supplied by your messaging provider. Turn the power switch on and

MESSAGE PLAY OPERATION The SoundBrick 500 plays the loaded audio message continuously or only when externally triggered, depending on the position of

WALL MOUNTING INSTRUCTIONS Using the screw holes on the back plate as a guide, secure two screws into the wall where you want to mount the unit. Then

TROUBLESHOOTING If you have trouble installing or operating the SoundBrick 500, refer to the table below to help find a solution. If you are unable

LIMITED WARRANTY AND LIMITATION OF LIABILITY Avaya Communications warrants to you that the product will be free from defects in material and workmans

FCC NOTICE RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits for a Class A digital device, p

SoundBrick 500 01/08/2001 18 QUICK INSTALL INSTRUCTIONS 12VDC power supply (included) 1/8” mini-plug trigger cable (optional) ➨Connect to trigg

TABLE OF CONTENTS What is the SoundBrick 500? ... 4 System Overview ...

To Order Additional Systems Call: Your Avaya Communications Sales Representative 1-800-247-7000 or Avaya Communications Direct 1-800-451-2100

WHAT IS THE SOUNDBRICK 500? The SoundBrick Model 500 is a solid-state digital audio recording and playback device designed to provide a continu

SYSTEM OVERVIEW Front Panel The monitor speaker, tape drawer eject button, and indicator lights are located on the front panel. Main power light

Play, Load, and Status lights Play and Load lights — These lights together indicate the current status of the unit. Play Light Load Light Indi

Connections Panel The left side panel is where the connectors are for external equipment including the power supply, the phone system that receives t

TAPE PREPARATION INSTRUCTIONS To get the best audio reproduction, it is essential to start with a high-quality recording. In order to load into memo

INSTALLATION Step 1 – Set the option switches Set the option select “DIP” switches to match your requirements for play mode, bandwidth, and speaker