Avaya BCM50 User Manual download pdf (Page 20)

20 Chapter 3 Hardware installation

NN40170-308

Rack-mount installation

To install an Avaya BCM50 unit (main unit or expansion unit) in an equipment rack, you need the

optional rack-mount kit (NT9T6325E5). This kit provides the parts to mount up to four Avaya

BCM50 units in a standard 19-inch equipment rack.

Use the following procedures to install an Avaya BCM50 unit in a rack:

• To install the rack-mount shelf in an equipment rack on page 20

• To install an Avaya BCM50 unit on the rack-mount shelf on page 20

To install the rack-mount shelf in an equipment rack

1 Determine the location in the rack where you want to install the Avaya BCM50 unit.

2 Position the rack-mount shelf in the rack.

3 Align the holes in the rack-mount shelf with the holes in the equipment rack rails.

4 Fasten the rack-mount shelf to the rack using the four rack screws (supplied with the

rack-mount kit).

To install an Avaya BCM50 unit on the rack-mount

shelf

1 Place the Avaya BCM50 unit on the rack so that the feet of the unit fit in the depressions in the

shelf.

2 Move the unit forward until the feet touch the front side of the depressions.

3 Slide the unit back until the feet click in place on the slots in the depressions. See the figure

Attach the units to the rack-mount shelf on page 21.

4 If you want to further secure the unit, use the four self-tapping screws (for plastic) supplied

with the rack-mount kit to attach the unit to the rack-mount shelf.

a Align the screw holes in the unit with the holes in the rack-mount shelf.

b Insert the four screws through the holes in the bottom of the shelf and into the screw holes

in the bottom of the unit.

Caution: Use only the screws supplied with the rack-mount kit (NT9T6325). Do not

replace the screws. Other screws can damage the unit.

5 minutes

7 minutes

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

No comments

Avaya BCM50 User Manual Page 20