Avaya P460 User Manual Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
Chapter 2 Avaya P460 CLI Commands
96 Avaya P460 Reference Guide
Example:
set port spantree
User level: read-write, admin.
Use the set port spantree command to enable or disable the spanning tree
mode for specific switch ports.
The syntax for this command is:
set port spantree {enable|disable} [module/port]
Example:
set port spantree cost
User level: read-write, admin.
Use the set port spantree cost command to set the cost of a port. This value
defines which port will be allowed to forward traffic if two ports with different costs
switchback-interval The period the primary port link has to be
“up” before the system switches back (in
milliseconds).
If switchback interval is zero, the system
never switches back
If it is one, switchback occurs immediately
after the primary port link returns
none The system switches bank only if the
secondary link fails.
P460-1# set port redundancy-intervals 100 20
enable|disable Enables or disables the spanning tree mode for the
specified ports.
Module Module number
Port Port number
P460-1# set port spantree enable 3/1
port 3/1 was enabled on spantree
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 223 224

Comments to this Manuals

No comments