Avaya BSG8/12 1.0 Configuration Guide download pdf (Page 45)

Wireless network configuration 45

Configuration Guide

Variable definitions

The following table describes the variables and values for configuring the wireless network.

Variable Value

Select Select the first default SSID to configure security settings.

Authentication Type Specifies the method used to authenticate wireless clients. Select

the Authentication Type for stations that use this SSID.

Select Open if authentication is not required.

Select Open1X to use 802.1x authentication.

Select Shared to use a shared key.

Select WPA, WPA2, or WPA-WPA2-Mixed if Radius server is used

for authentication.

Select WPA-PSK, WPA2-PSK, or WPA-WPA2-PSK-Mixed if

authentication uses a preshared key.

Pre-Authentication Specifies the preauthentication status.

Select Enabled to enable the Robust Security Networks Association

(RSNA) pre authentication on this entity. Stations authenticate to

different APs, if present, but associate to a single AP.

Select Disabled to disable the RSNA pre authentication. Stations

authenticate to a single AP.

This field is available only if Authentication Type is set to WPA,

WPA2, or WPA-WPA2-Mixed.

Pre Shared Key Type Specifies the preshared key type, either Hex or ASCII.

If you select Hex, you must provide a Hex key in the PreSharedKey

field.

If you select ASCII, you must provide ASCII characters in the

PreSharedKey field.

The pass-phrase is an ASCII character string, whereas the manual

key is a string of hexadecimal numbers.

This option is enabled only when the authentication type is

WPA-PSK, WPA2-PSK, or WPA-WPA2-PSK-Mixed.

Pre Shared Key Specifies the preshared key.

If the PreSharedKey (PSK) Type is Hex, the PSK length must be 64.

If the PSK Type is ASCII, the PSK length ranges between 8 and 63.

This option is enabled only when the authentication type is

WPA-PSK, WPA2-PSK, or WPA-WPA2-PSK-Mixed.

1 ... 44 45 46 ... 200

No comments

Avaya BSG8/12 1.0 Configuration Guide Page 45