Avaya Configuring DLSw Services User Manual Page 211

  • Download
  • Add to my manuals
  • Print
  • Page
    / 272
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 210
DLSw Service Parameters
304233-A Rev. 00
A-71
Parameter: Protocol Priority
Path: Configuration Manager > Protocols > DLSw > Prot Prioritization (Outbound) >
Peer Queue Entries
Default: Disabled
Options: Enabled
|
Disabled
Function: Toggles protocol prioritization on and off for this peer. If you set this parameter
to Disabled, priority filters will be disabled on this peer. Setting this parameter
to Disabled is useful if you want to temporarily disable protocol priority but
leave the outbound filters in place.
Instructions: Set to Disabled if you want to temporarily disable all protocol prioritization
activity on this peer. Set to Enabled if you previously disabled protocol
prioritization on this peer and now want to reenable it.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.5
Parameter: Max Queue Buffers
Path: Configuration Manager > Protocols > DLSw > Prot Prioritization (Outbound) >
Peer Queue Entries
Default: 50
Range: 10 to 2147483647
Function: Specifies the maximum number of packets in each of this peers queues.
Instructions: Enter a number of packets to increase or decrease the default buffer size of 50
packets.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.6
Parameter: Max Queue Size
Path: Configuration Manager > Protocols > DLSw > Prot Prioritization (Outbound) >
Peer Queue Entries
Default: 16000
Range: 5000 to 2147483647
Function: Specifies the maximum size of each of this peers queues
Instructions: Enter a number of bytes to increase or decrease the default queue size of 16000
bytes.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.5.5.1.7
Page view 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 271 272

Comments to this Manuals

No comments