Avaya Synchronous Net Modules in an ASN Platform User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
Replacing the Component Tray
Test Part Number BNX Software Version <x.x> Installing a Net Module11
Replacing the Component Tray
Before you replace the component tray, remove the alligator clip of the antistatic
strap from the chassis. Then remove the antistatic wrist strap from your wrist.
To replace the component tray:
1. Gently slide the tray into the chassis.
2. Use a Phillips screwdriver to tighten the two captive screws that fasten
the tray to the chassis (refer to Figure 1-1).
3. Reattach the cables to the proper connectors on the back panel.
See Chapter 2 for information about the LEDs on the net module.
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Comments to this Manuals

No comments