Avaya Configuring IP Utilities User Manual Page 29

  • Download
  • Add to my manuals
  • Print
  • Page
    / 228
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 28
Starting IP Utilities
304234-A Rev 00
1-7
Starting TFTP Services
You can use the BCC command line interface or the Site Manager graphical user
interface to configure TFTP on the router, using default values for all parameters.
Before you begin, verify that you have configured IP on an interface, as described
in “Configuring IP for Global Protocols
” on page 1-2.
Using the BCC
To start TFTP on the router with default settings, begin in configuration mode at
the box-level prompt:
1.
Configure TFTP
.
box# tftp
tftp#
2.
Display TFTP default settings
.
tftp# info
on box
state enabled
default-volume 2
retry-timeout 5
close-timeout 25
retry-count 5
Using Site Manager
You can easily start TFTP services using all default parameter values. If you
decide to change some or all of the defaults, refer to the instructions in Chapter 5.
Before you begin, verify that you have configured IP on an interface, as described
in “Configuring IP for Global Protocols
” on page 1-2.
Page view 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 227 228

Comments to this Manuals

No comments