Avaya Using Technician Interface Software User Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 382
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
Using Technician Interface Software
1-12 117381-A Rev. A
Login Configuration
For instructions on changing the default values associated with the console port,
see “Configuring Console Port Parameters” in Chapter 2.
For instructions on changing the default values associated with Telnet access to
the Technician Interface, see Configuring IP Utilities.
For information about changing the default values associated with SecurID
services, see “Enabling and Disabling SecurID Authentication” in Chapter 8.
Logging Out
To exit a Technician Interface session, enter the following command after the
Technician Interface prompt:
logout
For a console connected directly to the router, the Login prompt reappears:
Login:
<User
|
Manager>
Password:
<password>
(if enabled)
Passcode:
<passcode>
(if enabled)
For a remote terminal program on a PC or workstation connected to the router by
means of modems, the following messages appear, and the Technician Interface
hangs up the telephone:
TI session logged out.
** Goodbye. **
If the Modem Enable parameter has a setting of Disable (default) and the session
terminates unexpectedly, the router does not automatically log you out. You must
reestablish a connection to the router and log out using the
logout command.
Note: To use the Technician Interface with a modem, see Chapter 2.
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 381 382

Comments to this Manuals

No comments