30 Chapter 1 Configuring switches
311208-A Rev 00
Configuring IP
You can use Quick2Config to configure the subnet mask and default gateway for a
switch, and to view the switch MAC and IP addresses. The stack or standalone IP
and MAC addresses are imported from the device and are read-only.
To set IP properties:
1
In the navigation pane, open the switch object and select IP.
The IP Basic tab opens in the context-sensitive pane (Figure 6).
Figure 6 IP properties
2
Type the subnet mask for the IP address.
Network routers use the subnet mask to determine the network or subnet
address portion of a host’s IP address. The bits in the IP address that contain
the network address (including the subnet) are set to 1 in the address mask,
and the bits that contain the host identifier are set to 0.
3
Type the IP address of the default gateway host.
Comments to this Manuals