Avaya Quick2Config User Manual download pdf (Page 75)

Chapter 4 Setting access permissions and device properties 75

Using the Optivity Quick2Config 2.2 Client Software

Property undo

You can undo the last change that you make in the Properties tab in one of the

following ways:

• Choose Edit > Undo.

• Click the Undo button in the lower-left corner of the Properties tab.

Setting device properties

Typically, you set the properties for a device, interface, or protocol one at a time.

Quick2Config supports many networking devices, interfaces, and protocols, and

describing the properties for each is outside the scope of this guide. If you have

questions about a particular device’s properties, refer to the documentation for that

device.

Quick2Config provides a wizard for making global password changes and a tool

for calculating IP subnet addresses.

Setting device passwords

You can change device passwords easily with the Password Wizard, which you

can run on a folder, a group of devices, or a single device. If you run the wizard on

a folder, the wizard changes passwords on all devices in that folder.

Note:

The Undo command and the Undo button are enabled only if the

previous operation can be undone.

Note:

The passwords on the physical devices are not changed until you

export the configuration data. See “Exporting configuration data” on

page 79.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 109 110

No comments

Avaya Quick2Config User Manual Page 75