Enabling Encryption
117386-B Rev 00
3-23
The TEK Change Seconds parameter sets the number of seconds between changes
in the value of the TEK.
To set the TEK Change Seconds parameter for an interface:
4.
Click on Done to exit the window.
Disabling Encryption
To disable data encryption on a PPP circuit, follow these instructions:
Site Manager Path
You do this System responds
1. Set the
TEK Change (Seconds)
parameter. Click on
Help
or see the
parameter description on page A-7.
2. Click on
Apply
. The WEP Line Parameters window
remains open.
Site Manager Path
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols window opens.
2. Choose
PPP
. The PPP menu opens
3. Choose
Interfaces
. The PPP Interfaces window opens.
4. Click on
Lines
. The PPP Line Lists window opens.
5. Set the
Encrypt Enable
parameter to
Disable
. For help, click on
Help
or see the
parameter description on page A-2.
6. Click on
Apply
. The PPP Interface Lists window remains
open.
7. Click on
Done.
Comments to this Manuals