Avaya IP Line User Manual Page 535

  • Download
  • Add to my manuals
  • Print
  • Page
    / 772
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 534
IP Line administration using Element Manager Page 535 of 770
IP Line Description, Installation, and Operation
12 Remove the Voice Gateway Media Card configuration data from the Call
Server.
a. Identify the TN of the Voice Gateway Media Card.
b. In LD 20, enter the LTN (List Terminal Number) command where
TYPE = VGW, to list the TNs on the Voice Gateway Media Card TN.
This returns a list of units equipped on the card. Verify the number of
units that are equipped on the card. Note the first unit equipped on
the card.
c. In LD 14, use the Out n command, where n equals the number of
units that are equipped on the card.
13 At the TN prompt, enter the TN for the first unit that was equipped on the
card. As the units are deleted, verify that the intended units are outed.
End of Procedure
Delete the Leader Voice Gateway Media Card from the node
In the usual system configuration, the Signaling Server is the Leader of the
node. However, if a second or subsequent node is configured on the system,
then a Voice Gateway Media Card is configured as the Leader for that node.
If the Leader card for a second or subsequent node (that is, the card in Element
Manager that displays the card role as Leader) is deleted, then another card in
the node must be selected and the setLeader command must be issued on that
card. A node must have a Leader card for it to operate correctly when the node
is powered up.
Note: The role of a card can be viewed in Element Manager; however,
it cannot be changed there. Element Manager displays the card role based
on the setLeader status of the card.
Follow the steps in the Procedure 90 on page 536 to first select a new Leader
card and then to delete the current Leader Voice Gateway Media Card.
Page view 534
1 ... 534 535 536 ... 772

Comments to this Manuals

No comments