Avaya Business Policy Switch 2000 Software Version 1.2 User Manual download pdf (Page 105)

Configuring the switch 105

Using Web-based Management for the Business Policy Switch 2000 Software Version 1.2

Table 34 describes the items on the High Speed Flow Control page.

2 In the upper-left hand corner, click on the unit number of the gigabit MDA

to configure.

3 Select from the lists.

4 Click Submit.

Downloading switch images

You can download the BPS 2000 software image that is located in non-volatile

flash memory. To download the BPS 2000 software image, a properly configured

Trivial File Transfer Protocol (TFTP) server must be present in your network, and

the policy switch must have an IP address. To learn how to configure the switch or

stack IP address, refer to “Configuring BootP, IP, and gateway settings” on

page 58.

Table 34 High Speed Flow Control page items

Item Range Description

Autonegotiation (1) Enabled

(2) Disabled

Choose to enable or disable the autonegotiation feature.

When enabled, the port advertises support for flow control

autonegotiation.

Flow Control (1) Enabled

(2) Symmetric

(3) Asymmetric

Choose your flow control preference to control traffic and avoid

congestion on the gigabit MDA port.

Note: Ensure that the settings are the same for both sides of the link.

Preferred Phy (1) Left

(2) Right

Choose the preferred physical port. The port not selected automatically

reverts to a backup physical port.

Active Phy The current operating physical port. The physical port options are

left or right.

Caution: Do not interrupt power to the device during the software

download process. A power interruption can corrupt the firmware image.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 279 280

No comments

Avaya Business Policy Switch 2000 Software Version 1.2 User Manual Page 105