Avaya BCM450 User Manual

BCM450 Rls 6.0 System Start Up Task Based Guide

BCM450 System Start Up 10 NN40010-317 Issue 1.2 BCM450 Rls 6.0 PC Configu

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 11 Physical Connection to the BCM The BCM OAM port can accommodate either a patch cabl

BCM450 System Start Up 12 NN40010-317 Issue 1.2 BCM450 Rls 6.0 2. Type c

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 13 Installing the Element Manager Application Element Manager is the application that

BCM450 System Start Up 14 NN40010-317 Issue 1.2 BCM450 Rls 6.0 3. If you

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 15 6. You will be asked to enter the BCM account credentials. Tick the Save Credentia

BCM450 System Start Up 16 NN40010-317 Issue 1.2 BCM450 Rls 6.0 8. From t

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 17 11. If there hasn’t been a previous installation of Element Manager an “empty” vers

BCM450 System Start Up 18 NN40010-317 Issue 1.2 BCM450 Rls 6.0 2. Altern

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 19 5. Enter the User Name of the BCM in the User Name field, by default this is nnadm

BCM450 System Start Up 2 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Copyright

BCM450 System Start Up 20 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Software K

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 21 4. Browse to the location of the file and select it. Click Open. 5. The featu

BCM450 System Start Up 22 NN40010-317 Issue 1.2 BCM450 Rls 6.0 6. If yo

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 23 2. In the Configuration tab open the System heading and click on IP Subsystem.

BCM450 System Start Up 24 NN40010-317 Issue 1.2 BCM450 Rls 6.0 4. Enter

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 25 7. If Obtaining an IP Address dynamically, tick the Obtain IP address dynamical

BCM450 System Start Up 26 NN40010-317 Issue 1.2 BCM450 Rls 6.0 11. DNS s

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 27 2. Select the General Settings tab. It is normally selected by default. 3. Con

BCM450 System Start Up 28 NN40010-317 Issue 1.2 BCM450 Rls 6.0 5. Click

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 29 Attribute Value Description node is used only as a last resort. Default: H-node

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 3 Downloading documents For the most current versions of documentation, see the Avaya

BCM450 System Start Up 30 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Setting th

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 31 4. If setting the Date and Time Source as NTP, click on the Modify but

BCM450 System Start Up 32 NN40010-317 Issue 1.2 BCM450 Rls 6.0 7. Also e

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 33 3. Click Cold Reset Telephony Services. 4. The Cold Reset Telephony dial

BCM450 System Start Up 34 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Configurin

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 35 4. To configure the private received number length, in the Configuration tab open

BCM450 System Start Up 36 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Initialisi

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 37 4. The Quick Install Wizard form displays. If your VoiceMail system is al

BCM450 System Start Up 38 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Attribute

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 39  MBM1 – DSM32+ (1st) = 221 – 252  IP Sets = 253 – 268  Applications = 300 – 3

BCM450 System Start Up 4 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Table of C

BCM450 System Start Up 40 NN40010-317 Issue 1.2 BCM450 Rls 6.0 2. Select

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 41 IP Trunk Configuration If IP trunks have been purchased (enabled via keycodes) and

BCM450 System Start Up 42 NN40010-317 Issue 1.2 BCM450 Rls 6.0 3. Line

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 43 IP Sets Configuration IP Sets configuration consists of:  Assigning the DN range

BCM450 System Start Up 44 NN40010-317 Issue 1.2 BCM450 Rls 6.0 5. It is

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 45 Note: For full details concerning IP Phone registration and configuration, refer to

BCM450 System Start Up 46 NN40010-317 Issue 1.2 BCM450 Rls 6.0 1. From t

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 47 6. The new numbering range will be displayed. Media Bay Module Configuration Whe

BCM450 System Start Up 48 NN40010-317 Issue 1.2 BCM450 Rls 6.0 4. Set th

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 49 6. The Configure dialog box will appear. You can accept the defaults or configure

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 5 ASM Analog Station Module Configuration ...

BCM450 System Start Up 50 NN40010-317 Issue 1.2 BCM450 Rls 6.0 9. If the

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 51 12. You will notice that the required Dip Switch configuration for each MBM is defi

BCM450 System Start Up 52 NN40010-317 Issue 1.2 BCM450 Rls 6.0 17. Click

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 53 3. Select the MBM you want to further configure. The MBM specific settings can be

BCM450 System Start Up 54 NN40010-317 Issue 1.2 BCM450 Rls 6.0 6. When y

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 55  Secondary external: The DTM/BRI acts as a standby reference point. If there ar

BCM450 System Start Up 56 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Checking L

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 57 1. In this example the system has a single PRI Digital Trunk Media Bay Module inst

BCM450 System Start Up 58 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Attribute

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 59 Attribute Value Module/line type 600-700 feet Set the distance between BCM and

BCM450 System Start Up 6 NN40010-317 Issue 1.2 BCM450 Rls 6.0 System Sta

BCM450 System Start Up 60 NN40010-317 Issue 1.2 BCM450 Rls 6.0 DPNSS Modu

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 61 DPNSS Module-Specific Settings BRI Module 1. There are no module-specific s

BCM450 System Start Up 62 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Use the fo

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 63 Attribute Value Description ONN blocking Suppression bit Service code N/A Set

BCM450 System Start Up 64 NN40010-317 Issue 1.2 BCM450 Rls 6.0 CTM/GATM (

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 65 Station Media Bay Modules With station media bay modules (MBM) you can conn

BCM450 System Start Up 66 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Attribute

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 67 Combination Modules These modules provide a combination of both lines and extension

BCM450 System Start Up 68 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Connecting

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 69 4. Configure the IP Terminal Global Settings attributes. 5. Now register the I

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 7  License File (Keycode File)  Telephony Template  Start DN of the system  Pu

BCM450 System Start Up 70 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Additional

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 71 3. Click the Macro Security button. 4. Select Medium or Low. 5. Click OK (twi

BCM450 System Start Up 72 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Obtaining

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 73 4. Accept any further security messages that you may get presented with. 5.

BCM450 System Start Up 74 NN40010-317 Issue 1.2 BCM450 Rls 6.0 7. From t

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 75 11. Select the Save button from the File Download window and save the Profile templ

BCM450 System Start Up 76 NN40010-317 Issue 1.2 BCM450 Rls 6.0 13. The ex

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 77 14. Once you have read the instructions select the Startup Profile Templat

BCM450 System Start Up 78 NN40010-317 Issue 1.2 BCM450 Rls 6.0 DHCP Serve

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 79 Other Settings It is recommended that the rest of the settings in the St

BCM450 System Start Up 8 NN40010-317 Issue 1.2 BCM450 Rls 6.0 Flow Chart

BCM450 System Start Up 80 NN40010-317 Issue 1.2 BCM450 Rls 6.0 18. If usi

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 81 19. Once you have entered the configuration details as outlined in the fo

BCM450 System Start Up 82 NN40010-317 Issue 1.2 BCM450 Rls 6.0 21. Save a

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 83 Configuring the Fibre Expansion Module The Fibre Expansion Module (FEM) has a

BCM450 System Start Up 84 NN40010-317 Issue 1.2 BCM450 Rls 6.0 3. Double

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 85 5. Double-click in the Configured Devices field for each connected Norstar

BCM450 System Start Up 86 NN40010-317 Issue 1.2 BCM450 Rls 6.0 7. When t

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 87 Note: There must be enough DN’s available in the system to populate the entire

BCM450 System Start Up 88 NN40010-317 Issue 1.2 BCM450 Rls 6.0 13. Switch

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 89 16. An advisory dialog box will display. Click OK to close the box. 17. When the B

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 9 Obtaining a Keycode File Keycodes unlock features and applications on the BC

BCM450 System Start Up 90 NN40010-317 Issue 1.2 BCM450 Rls 6.0 5. The c

BCM450 System Start Up NN40010-317 Issue 1.2 BCM450 Rls 6.0 91 Avaya Documentation Links  Installation – System  Installation – Devices  Key

BCM450 System Start Up 92 NN40010-317 Issue 1.2 BCM450 Rls 6.0