$ Troubleshooting for Data Applications
Business Communications Manager ATA 2 User Guide P0941633 Issue 01
Troubleshooting for Data Applications
If you are having trouble, check the following before calling a repair person:
1. Make sure the data parameters (parity, baud) are set correctly.
2. Make sure Business Communications Manager Analog Terminal Adapter 2 is
in the tones OFF mode.
3. Make sure you are dialling out on the proper line. The proper line is either an
intercom or external line. See Alternate Line on page 6 of the Feature List. To
change your prime line, see your System Administrator.
4. Substitute a single line telephone for your data communication device. If you
receive a dial tone on the single line telephone, the problem may be with the
data communication device.
Comments to this Manuals