Avaya P580 User Manual Page 495

  • Download
  • Add to my manuals
  • Print
  • Page
    / 764
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 494
Document No. 10-300090, Issue 1 23-7
80-Series QoS
Replace the existing DSCP of
packets with a DSCP of 12 for all
traffic that has a source IP address of
199.93.238.83.
Mask the three least significant bits
of the DSCP.
(configure)# access-list
MyAccessList2 4 permit remark l2
mask ip host 199.93.238.83 any
Replace the existing DSCP of the
packet with a DSCP of 24 for all
ICMP traffic that has a:
Source IP address of 2.2.2.2
Destination IP address of 4.4.4.4
(configure)# access-list
MyAccessList2 5 permit remark 24
icmp host 2.2.2.2 host 4.4.4.4
Assign a priority of 6 to all TCP traffic
that has a:
Source IP address in the 10.10.10
subnet
Destination IP address in the
11.11.11 subnet
Destination port of 1
(configure)# access-list
MyAccessList2 6 permit use-
priority 6 tcp 10.10.10.0 0.0.0.255
11.11.11.0 0.0.0.255 eq 1
Use the layer 2 priority in the packet
to classify all UDP traffic
(configure)# access-list
MyAccessList2 7 permit use-l2 udp
any any
Use the layer 2 priority in the packet
to classify all TCP traffic that has a:
Source IP address in the 5.5.5
subnet
Destination IP address in the
6.6.6 subnet
Destination port that is less
than 2
Permit TCP connections that meet
this criteria
(configure)# access-list
MyAccessList2 8 permit use-l2 tcp
5.5.5.0 0.0.0.255 6.6.6.0 0.0.0.255 lt 2
established
Table 23-3. Examples: Extended ACL Rules
To. . . Enter. . .
2 of 3
Page view 494
1 2 ... 490 491 492 493 494 495 496 497 498 499 500 ... 763 764

Comments to this Manuals

No comments