Avaya 1000 Series Video Conferencing Systems Application Note Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 45
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
TJM Reviewed:
SPOC 12/01/2010
Solution Interoperability Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
5 of 45
SM6_CMFS6_10x0
1.1. Equipment and Software Validated
The following equipment and software were used for the sample configuration.
Equipment Software
Avaya Aura
TM
Session Manager Release 6.0.0.0.600020
Avaya Aura
TM
System Manager Release 6.0 Load: 6.0.0.0.11
Avaya Aura
TM
Communication Manager
• Avaya S8800 Server Feature Server
Release R016x.00.0.345.0-2350
Avaya IP Telephones10x0 Video Endpoints (SIP):
• 1020
• 1030
• 1040
FW: AV_PP1_4.7.0 (19)2.0
FW:3.0 AV_EX2_4.7.0 (19)
FW:1.5 AV_TM2_4.7.0 (19)
2. Configuring Avaya Aura
TM
Communication Manager
Feature Server
This section describes the administration of Communication Manager Feature Server using a
System Access Terminal (SAT). Alternatively, some of the station administration could be
performed using the Communication System Management application on System Manager.
These instructions assume the G450 Media Gateway is already configured on the
Communication Manager Feature Server. Some administration screens have been abbreviated for
clarity.
Verify System Capabilities and Communication Manager Licensing
Administer IP node names
Administer codec type
Administer IP network region
Administer SIP signaling group
Administer SIP trunk group
Administer numbering plan
Administer station endpoints
Administer off-pbx-telephone station-mapping
Save translations
After completing these steps, the “save translation” command should be performed
.
2.1. Verify System Capabilities and Licensing
This section describes the procedures to verify the correct system capabilities and licensing have
been configured. If there is insufficient capacity or a required feature is not available, contact an
authorized Avaya sales representative to make the appropriate changes.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 44 45

Comments to this Manuals

No comments