Avaya 1040 Installation Guide download pdf (Page 25)

25 Avaya 1040 Installation Guide

Status Icons

The following table identifies the icons that can appear in the system status bar.

Icon Condition

Indicates that the communication subsystem is initializing. If this icon

reappears after the system has booted, a problem has occurred. Reboot

the system.

Indicates that the system is initializing. When the system is initializing,

functionality on the main screen is disabled and no entries appear in the

REDIAL list. This icon also appears when a new device is connected to

the system after the system boots and disappears when the device is

ready. If the icon persists, a problem has occurred and rebooting the

system is necessary.

Indicates that the connected phone has been detected and the phone is

initializing. If the icon persists, a problem has occurred and rebooting the

system is necessary.

Indicates that the system does not have an active microphone. Check the

device’s connections and then check the option you selected for the

Active Microphone preference.

Network

Status

Identifies the network status, as follows:

connected (green indicator)

in progress (yellow indicator)

disconnected (red indicator)

System

Overheating

This yellow indicator warns you when the system temperature is

above normal operating temperature. The codec adjusts fan

speed automatically to cool itself.

This red indicator warns that the system is overheated and

approaching the maximum allowed operating temperature and

will automatically reboot after reaching it.

Warning: Temperatures that require the codec to reboot can permanently

damage codec components. Ensure the room that houses the codec is

properly ventilated and temperature controlled.

1 2 ... 20 21 22 23 24 25

No comments

Avaya 1040 Installation Guide Page 25