Avaya Business Policy Switch 2000 Software Version 1.2 User Manual download pdf (Page 89)

Configuring the switch 89

Using Web-based Management for the Business Policy Switch 2000 Software Version 1.2

2 Complete fields as described in the table.

3 Click Submit.

Configuring MAC address-based security

Beginning with software version 1.1, the MAC address-based security system

allows you to specify a range of system responses to unauthorized network access

to your switch with the Web-based management system.

The system response can range from sending a trap to disabling the port. The

network access control is based on the MAC addresses of the authorized stations.

You can specify a list of up to 448 MAC addresses that are authorized to access

the switch. You can also specify the ports that each MAC address is allowed to

access. The options for allowed port access include: NONE, ALL, and single or

multiple ports that are specified in a list, for example, 1-4, 6, 9, and so forth. You

must also include the MAC address of any router connected to any secure ports.

When the switch software detects a security violation, the response can be to send

a trap, turn on destination address (DA) filtering, disable the specific port, or any

combination of these three options.

Web/Use List (1) Yes

(2) No

Restricts Web access to the specified 10 source IP

addresses.

Allowed Source IP

and Subnet Mask

Allowed Source IP XXX.XXX.XXX.

XXX

Enter the source IP address you want to allow

switch access.

Allowed Source Mask XXX.XXX.XXX.

XXX

Enter the source IP mask you want to allow switch

access.

Note: After configuring the switch for MAC address-based security,

you must enable the ports you want, using the Port Configuration page.

Table 27 Remote Access page fields (continued)

Section Item Range Description

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 279 280

No comments

Avaya Business Policy Switch 2000 Software Version 1.2 User Manual Page 89