Avaya 4620SW User Manual download pdf (Page 13)

4. Press the Line/Feature button associated with the name/number of the person you want to call.

o The associated Call Detail screen is displayed.

5. Select Call.

o The phone goes off-hook.

o The selected party's number is dialed.

o If the "Phone Screen on Calling" option is set to "Yes" in your IP Telephone Options the Phone application

screen is displayed.

o A Call Log entry is created for this call.

Note: If your administrator has set up the Enhanced Dialing feature, selecting Call causes the IP Telephone to

automatically add any appropriate digits (such as those required to get an outside line) to phone numbers in the Missed

and InAns Call Logs. If you press Call, but the call does not go through, check with your Telephone Administrator to

ensure the Enhanced Dialing feature is set up properly for your environment.

6. Proceed with the call as you normally would.

To delete all entries from a Call Log:

1. To access the Call Log application, press the Log softkey.

o The Missed Call Log is displayed by default.

2. Navigate to the Call Log screen containing the entries to be deleted.

3. Press the Delete All softkey.

o The prompt "press Delete again to confirm" is displayed.

4. Visually verify that you want to delete all entries for the Call Log.

5. If you want to complete the deletion of all entries for this Call Log, press Delete.

Note: If you want to cancel the deletion without removing all of this Call Log's entries, press Cancel instead and exit

this procedure.

o The entries are removed.

o The Call Log's Main Screen is displayed.

6. To exit the Call Log application, press the Phone/Exit (

) button.

To delete a single Call Log entry:

1. To access the Call Log application, press the Log softkey.

o The Missed Call Log is displayed by default.

2. Navigate to the Call Log screen containing the entry to be deleted.

3. Press the Line/Feature button corresponding to the call to be deleted.

o The Detail Screen for that call is displayed.

4. Press the Delete softkey.

o The prompt "Press Delete again to confirm" is displayed at the top of the screen.

5. Visually verify that you want to delete the name and number displayed.

6. If you want to complete deleting this Call Log entry, press Delete.

Note: If you want to cancel the deletion and not remove this Call Log entry, then press Cancel instead and exit this

procedure.

o The entry is removed.

o The remaining entries on this Call Log remain sorted in chronological order.

o The Call Log's Main screen is displayed.

7. To exit the Call Log application, press the Phone/Exit (

) button.

Reset Phone

To reset your IP Telephone:

1. Press the Mute button.

2. Using the dial pad, press the following keys in sequence: 73738#

o The display prompts "Reset values? * = no # = yes."

3. If you want to reset the phone without resetting any assigned values, press * (asterisk).

{Confirmation tone}

o The display prompts "Restart phone? * = no # = yes."

If you want to reset the phone and any previously assigned (programmed) values, press # (the pound key).

Note: Use this option only if your phone has programmed, static values.

4620SW IP Telephone End User Guide | 13 | Page

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Comments to this Manuals

No comments

Avaya 4620SW User Manual Page 13

Comments to this Manuals

Related products and manuals for Phones Avaya 4620SW