Avaya BCM50 User Manual download pdf (Page 19)

Router – LAN Settings

NN40011-042 Issue 1.2 BCM50 Rls 6.0 19

Configuring Static DHCP

If PCs or IP Phones on the network require the same IP address constantly,

then the BCM50 Integrated Router can be configured to reserve an IP

address for that device.

1. Access the Web Router GUI (refer to the Accessing the Web Router

GUI section of this guide).

2. From the Main menu select LAN.

3. In the Static DHCP tab, enter the MAC Address of the device, and the

IP address to be reserved for it.

Static DHCP Settings

Field

Description

MAC Address

Type the MAC address (with colons) – otherwise known as the

physical address – of a computer on your LAN.

IP Address

Type the IP address that you want to assign to the computer on your

LAN.

Configuring IP Alias

Use this section to configure the Router Card with up to two more IP

Addresses. This will allow the BCM50 Integrated Router to connect to logically

separate networks, being the default gateway for each network.

1. Access the Web Router GUI (refer to the Accessing the Web Router

GUI section of this guide).

2. From the Main menu select LAN.

1 2 ... 14 15 16 17 18 19 20 21 22

No comments

Avaya BCM50 User Manual Page 19