Avaya BCM50 User Manual download pdf (Page 16)

Router – LAN Settings

16 NN40011-042 Issue 1.2 BCM50 Rls 6.0

LAN IP Address & DHCP

This section describes how to configure the BCM50 Integrated Router Card

LAN IP Address, Subnet Mask, and Multicast settings.

Also, use this section to configure the DHCP mode, start IP Address, and Pool

size. Ensure you allow enough IP Addresses in the Pool (size) to

accommodate all the DHCP clients on your network.

DNS servers can be entered (if known). The DNS information entered here

will be issued to DHCP clients to resolve domain name requests (e.g. whilst

using Internet Explorer to access websites by name).

Note: The DHCP range to be issued to DHCP clients should be on the same

network range as the Router Card LAN IP Address. For example, if the Router

Card LAN IP Address is 192.168.110.1, the DHCP start address should be

somewhere in the 192.168.110.x range (following subnet rules).

Note: It is possible to configure the DHCP service on the main module

instead of via the router itself. DHCP must be disabled on the router to be

able to configure DHCP on the main module. Refer to the DHCP Guide for

more information.

1. Access the Web Router GUI (refer to the Accessing the Web Router

GUI section of this guide).

2. From the Main menu select LAN.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Avaya BCM50 User Manual Page 16