Avaya BCM50 User Manual download pdf (Page 17)

Router – LAN Settings

NN40011-042 Issue 1.2 BCM50 Rls 6.0 17

3. In the IP tab, enter the DHCP, IP Address, Subnet Mask, and Multicast

options as required.

4. You can choose to allow Windows Networking packets (NetBIOS)

between the LAN and the WAN.

5. Click the Apply button to save your settings.

LAN IP Settings

Field

Description

DHCP Setup

DHCP

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC

2132) allows individual clients (workstations) to obtain TCP/IP

configuration at startup from a server. Unless you are instructed by

your ISP, leave this field set to Server. When configured as a server,

the Business Secure Router provides TCP/IP configuration for the

clients. When set as a server, fill in the IP Pool Starting Address and

Pool Size fields.

Select Relay to have the Business Secure Router forward DHCP

requests to another DHCP server. When set to Relay, fill in the DHCP

Server Address field.

Select None to stop the Business Secure Router from acting as a

DHCP server. When you select None, you must have another DHCP

server on your LAN, or else the computers must be manually

configured.

IP Pool Starting

Address

This field specifies the first of the contiguous addresses in the IP

address pool. The default is 192.168.1.2.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

No comments

Avaya BCM50 User Manual Page 17