Avaya BCM50 User Manual download pdf (Page 35)

Chapter 3 Hardware installation 35

Installation Checklist and Quick Start Guide

If you select the standard DHCP server on the main unit, you must first disable the DHCP server

on the integrated router. You can then configure the DHCP server functionality in the same way as

a non-router version.

If you select the DHCP server on the integrated router you can configure the router using the router

WebGUI tool.

By default, the integrated router LAN IP address is 192.168.1.1, and the IP address assigned to the

BCM50 system is the first IP address in the DHCP pool. If the DHCP pool starts at 192.168.1.190,

then the BCM50 is 192.168.1.190 even though the router is 192.168.1.1. Therefore, the BCM50

system receives the IP address 192.168.1.2 (subnet mask is 255.255.255.0) from the DHCP server

on the integrated router.

For more information about how to disable the DHCP server and select a DHCP server, see DHCP

server configuration on page 43.

WAN connection

Four types of BCM50 main units—the BCM50e and BCM50be (with Ethernet router) and the

BCM50a and BCM50ba (with ADSL router)—contain a router card. On the BCM50e and

BCM50be, the WAN port is an RJ-45 port. On the BCM50a and BCM50ba, the WAN port is an

RJ-11 port.

Refer to the following sections for information about connecting the BCM50 to the WAN:

• To connect the BCM50a or BCM50ba to the WAN on page 35

• To connect the BCM50e or BCM50be to the WAN on page 36

For more information, see the chapter “Connecting the BCM50 system to the LAN and WAN” in

the Installation and Maintenance Guide.

To connect the BCM50a or BCM50ba to the WAN

1 Use the Integrated Router Web GUI to configure the router card on the BCM50a or BCM50ba

main units. For more information about how to configure the router, see the BCM50a

Integrated Router Configuration Guide.

2 Make sure the power supply is connected to the BCM50a or BCM50ba main units and to the

AC power source (wall outlet).

3 Connect one end of a standard telephone cable to the ADSL telephone line provided by your

ISP.

Warning: Do not plug the WAN cable into the system unless the power supply is

connected to the main unit and an AC power source with a third-wire ground.

2 minutes

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

No comments

Avaya BCM50 User Manual Page 35