Avaya BSGX4e User's Guide Page 341

  • Download
  • Add to my manuals
  • Print
  • Page
    / 456
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 340
BSGX4e Business Gateway User Guide 341
Release 01.01 NN47928-102
Monitoring Tools
Packet rate
Bit rate
PMON creates traces by applying filters to the traffic received on the WAN interface.
The filters can apply to:
Port (source or destination)
IP address (source or destination)
IP ToS tag value
VLAN ID
IP protocol
MAC address (source or destination)
Interface
When more than one filter is specified, a logical AND is applied.
PMON records statistics in five-minute intervals over a 24-hour period, thus
recording 288 intervals. After 24 hours, PMON wraps statistics in FIFO (first-in
first-out) order.
All monitoring traces are synchronized. This allows easy comparison of the traffic
types received over a given period of time.
To use the PMON tool:
1.Enable the PMON agent.
2.Configure at least one trace.
3.Later, display the trace statistics.
4.Disable the PMON agent when monitoring is complete.
Enable PMON Command
To enable the PMON tool, enter the following command:
> config pmon agent enabled
When protocol monitoring is complete, disable the PMON tool with the following
command:
> config pmon agent enabled no
PMON Trace Command
To configure a PMON trace, enter the following command:
> config pmon trace
Table 108 describes the parameters for config pmon trace.
Page view 340
1 2 ... 336 337 338 339 340 341 342 343 344 345 346 ... 455 456

Comments to this Manuals

No comments