Configuring IP Multicasting and Multimedia Services
A-2 117355-A Rev. A
DVMRP Parameters
This section describes the DVMRP global, circuit, and tunnel parameters.
DVMRP Global Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: Enable
Options: Enable
| Disable
Function: Enables and disables DVMRP support on the router.
Instructions: To disable DVMRP once you have configured it on the router, specify Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.2
Parameter: Full Update Interval
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: 60
Options: 10 to 2000 seconds
Function: Specifies how often routing messages containing complete routing tables are
sent.
Instructions: Determine the full update interval you require and specify a value.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.4
Parameter: Triggered Update Interval
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: 5
Options: 5 or more seconds
Function: Specifies the minimum amount of time between triggered updates.
Instructions: Triggered updates are sent in the period between full updates. Issuing a full
update restarts the triggered update timer. Therefore, the triggered update
interval you specify must be shorter than the full update interval you specified
with the Full Update Interval parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.5
Comments to this Manuals