Configuring IP Multicasting and Multimedia Services
4-34 117355-A Rev. A
Supplying Addresses for the Tunnel
To identify a unicast tunnel, you must supply the unicast IP address of both ends
of the tunnel: the local interface and the remote interface. You can use Site
Manager to supply these addresses.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose Multicast. The Multicast menu opens.
4. Choose DVMRP. The DVMRP menu opens.
5. Choose Tunnel. The DVMRP Tunnel Parameters window
opens.
6. Click on Add. The DVMRP Tunnel Address window
opens.
7. Set the following parameters:
• Local IP Address
• Remote IP Address
Click on Help or see the parameter
descriptions beginning on page A-14.
8. Click on OK. You return to the DVMRP Tunnel
Parameters window.
Comments to this Manuals