Avaya Configuring XNS Services User Manual download pdf (Page 52)

Configuring XNS Services

4-16

303548-A Rev 00

Parameter: Listen

Default: Enable

Options: Enable

Disable

Function: Specifies whether this interface listens to RIP updates from neighboring

networks.

Instructions: Select Enable to configure this XNS interface to listen to RIP updates, and

to convey received routing information to its internal routing table.

Select Disable to configure this XNS interface to ignore RIP updates from

neighboring routers. Disabling RIP also prevents this interface from

conveying any received routing information to its internal routing table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.4.1.6

Configuring Adjacent Host Parameters

The sections that follow describe how to add, edit, and delete adjacent host routes

in a Bay Networks router configuration. You perform these actions via the XNS

Adjacent Hosts window.

To access the Adjacent Hosts window, begin at the Configuration Manager

window (refer to Figure 4-1) and select Protocols > XNS > Adjacent Hosts. The

XNS Adjacent Hosts window appears (Figure 4-5)

, showing a list of all Adjacent

Hosts currently associated with a specific Host ID. (The Host ID is a global

parameter for XNS interfaces defined on any slot.)

Note:

If you set this parameter to Enable, a route filter can still prohibit the

interface from updating its internal routing tables.

1 ... 51 52 53 ... 72

No comments

Avaya Configuring XNS Services User Manual Page 52