Avaya Configuring XNS Services User Manual download pdf (Page 57)

Editing XNS Parameters

303548-A Rev 00

4-21

Parameter: Enable

Default: The Configuration Manager automatically sets this parameter to Enable

when you click on Add in the XNS Adjacent Hosts window.

Options: Enable

Disable

Function: Specifies whether the selected adjacent host record is enabled or disabled

in the XNS routing tables. The router does not consider any adjacent host

record you disable.

Instructions: Select Disable to make the adjacent host record inactive in the XNS

routing table; the router will not consider this adjacent host.

Select Enable to make the adjacent host record active again in the XNS

routing table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.5.1.2

Parameter: Next Hop Intf

Default: None

Options: Configured network address of the next hop

Function: Specifies the network address of the next-hop interface.

Instructions: Enter a network address of up to 8 hexadecimal characters.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.5.1.5

1 ... 56 57 58 ... 72

No comments

Avaya Configuring XNS Services User Manual Page 57