Avaya G700 User Manual download pdf (Page 204)

100

101

Installing a new G700 without an S8300 using the Gateway Installation Wizard

204 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

4. Double-click the file name.

The system displays a File Download window.

5. Click on Save this file to disk.

6. Save the file to the C:\tftp directory (or your alternate tftp location).

7. Use WinZip or another zip file tool to unzip the file, if necessary.

Configure the G700

For a new installation of a G700 Media Gateway, you must complete the following configuration

tasks:

Note:

Note: The Avaya Gateway Installation Wizard (GIW) performs these tasks

automatically.

● Assigning the IP addresses of the G700 media gateway components

- Assigning the IP address for the P330 Stack Processor

- Establishing IP routing for the stack

- Assigning the IP address to the G700 media gateway processor

- Assigning the default IP route to the G700 media gateway

- Assigning IP addresses to the VoIP resources

- Checking for IP connections

● Setting up the media gateway controller list

● Setting the LSP Transition Points

However, the GIW does not configure an X330 Expansion module. This task you must perform

manually, as described in:

● Configure an X330 Expansion Module (If Necessary)

Install firmware on the G700 and media modules

The Avaya Gateway Installation Wizard (GIW) can perform the installation of new firmware on

the G700 and media modules automatically. You identify the specific firmware filenames and the

IP address of the TFTP server. The GIW then performs the following procedures:

● Installing new firmware on the P330 Stack Processor

● Installing new firmware on the G700 Media Gateway Processor

● Installing new firmware on the media modules

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 767 768

Comments to this Manuals

No comments

Avaya G700 User Manual Page 204

Comments to this Manuals

Related products and manuals for Networking Avaya G700