Avaya G700 User Manual download pdf (Page 676)

100

101

Manual upgrade of an existing S8300B and G700 to R3.1

676 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

2. Log in as craft or dadmin.

3. Enter w2ktt for the Terminal Type (if you are running Windows 2000 on your laptop).

4. Accept the default (y) for Suppress Alarm Origination.

Completing pre-upgrade tasks — If the target S8300 is the primary

controller

If the S8300 is configured as an LSP, skip to Upgrade the S8300 on page 694.

CAUTION:

CAUTION: If you are upgrading an S8300 primary controller that has LSPs registered to it,

the LSPs must be upgraded before the primary controller. (You can use the SAT

command, list media-gateway, to see if there are LSPs registered to the

S8300.)

Perform the following procedures if you are upgrading an S8300 that is configured as a primary

controller:

● To clear alarms

● To check link status

● To record all busyouts

● To disable scheduled maintenance

● To check for translation corruption

● To save translations

● To disable alarm origination

Note:

Note: It is no longer necessary to disable Terminal Translation Initialization (TTI) before

an upgrade or to enable it after an upgrade.

To clear alarms

1. On the Maintenance Web Interface under Alarms, click Current Alarms.

2. If no alarms are listed, skip the next two steps.

3. If alarms are listed, click Clear All.

4. Resolve any remaining major alarms through the Communication Manager SAT.

1 2 ... 671 672 673 674 675 676 677 678 679 680 681 ... 767 768

Comments to this Manuals

No comments

Avaya G700 User Manual Page 676

Comments to this Manuals

Related products and manuals for Networking Avaya G700