118943-B Rev 00
2-1
Chapter 2
Using the T1/FT1 Adapter Module in a BayStack
ARN Router
This chapter supplements Installing and Operating BayStack ARN Routers
(Chapter 4, “Installing a WAN Adapter Module”). Follow the hardware
installation steps in that manual, then refer to this document for information
specific to the T1/FT1 adapter module.
Verifying ARN Router Requirements
Table 2-1 shows the minimum boot and diagnostic programmable read-only
memory (PROM) code required for the T1/FT1 adapter modules.
For information on upgrading PROM, see the BayRS™ Upgrading Routers guide.
Attaching Cables
Connect the T1 communication device cable to the RJ-48C connector on the
installed T1/FT1 adapter module (Figure 2-1).
Table 2-1. PROM Diagnostic and Boot Code for ARN Routers
Code Type Minimum Version Directory File Name
Boot 1.18
arn_proms arnboot.exe
Diagnostic 2.00
arn_proms arndiag.exe
Comments to this Manuals