Avaya Business Communications Manager 5.0 - Planning and Engineering User Manual download pdf (Page 52)

52 Dialing plan set-up

Nortel Business Communications Manager 5.0

Planning and Engineering

NN40170-200 01.03 Standard

August 2009

Codes for remote access

When you set up lines that do not offer DISA directly on the line, you can

determine if remote access prompts with DISA or allows auto answering. This

determines the Public/Private Auto DN and Public/Private DISA DN settings,

which are set under Configuration > Telephony > Dialing Plan > Public

Network and Private Network. These numbers have the same first number as

you specified in the Start DN and be of the same length. Remote callers dial

the system public or private access number, and then dial either the Private/

Public Auto DN or Private/Public DISA DN, as determined by the line setup.

Codes for incoming calls

The Private Dialing Plan provides the special codes that identify the system to

calls coming over private PSTN or VoIP trunks. Calls that do not match the

private dialing plan information, are not accepted by the system.

Calls coming in over private networks or PRI/BRI termination target lines can

be set up for each telephone or group of telephones to which the calls are

directed. As with other incoming calls, these calls can have a public or private

call type that matches to a public or private received number assigned to a

target line.

Variable Example or default settings

Private Auto DN 2XX

Public Auto DN 2XX

Private DISA DN 2XX

Public DISA DN 2XX

Variable Example or default settings

Private network ID Number that identifies the system as part of the

private network

Location code UDP networks

Private DN length DPNSS systems only

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 323 324

No comments

Avaya Business Communications Manager 5.0 - Planning and Engineering User Manual Page 52