Implementing Quality of Service (QoS) 217
Using Web-based Management for the Business Policy Switch 2000 Software Version 1.2
3 Select from a list.
4 Click Submit.
The modified configuration appears in the DSCP Mapping Table
(Figure 110).
IP filter and IP filter group configurations
You can create an IP filter, which enables the switch to classify traffic. In turn, you
can create an access control list from a series of defined filters to create an IP filter
group. The filter group then determines access to and denial of network services.
Drop Precedence Loss Sensitive
Not Loss Sensitive
Choose the drop value precedence to use for traffic with the associated
802.1p user priority value with the identified queue. Selecting a Loss
Sensitive value specifies a low packet drop precedence; selecting a Not
Loss Sensitive value specifies a high packet drop precedence.
Note: Generally, low packet drop precedence receives preferential
treatment.
Service Class (1) Premium
(2) Platinum
(3) Gold
(4) Silver
(5) Bronze
(6) Standard
(7) Network
(8) Critical
Choose the service class.
Note: This field corresponds to the adjacent user priority levels.
Note: Mappings created on the DSCP mapping modification page are used at egress
for marking traffic:
• Trusted and unrestricted IP traffic—If you select the re-marking action of using the egress map,
the mappings determine the 802.1p priority and drop precedence values associated with
packets based on the DSCP of the received packet.
• Untrusted and untresticted traffic—If you select the re-marking action of using default, the
mappings determine the 802.1p priority and drop precedence values associated with packets
based on the DSCP value you specified in the Update DSCP action field.
Note: For more information on QoS interface classes—or trusted,
untrusted, and unrestricted ports—refer to
Using the Business Policy
Switch 2000 Software Version 1.2.
Table 86 DSCP Mapping Modification page items (continued)
Item Range Format
Comments to this Manuals