Avaya G700 User Manual download pdf (Page 189)

100

101

Administer Communication Manager

Issue 9.1 June 2006 189

Figure 19: Add Local Survivable Processor screen

2. The type field is automatically populated with LSP. LSP appears in the field if the node

name is not associated with ESS.

3. Enter a network region for the LSP. The default is 1. However, there may be a different

network region better suited for the LSP to provide media gateway and IP phone support.

Administering the Media Gateway

To perform the procedures in this section, to the primary controller, log in, and open a SAT

session.

CAUTION:

CAUTION: Before administering a media gateway, make sure that the gateway has been

fully configured.

In this section, you will do the procedures:

● To add a media gateway

● To verify changes

● To enable announcements, if necessary

● To save Communication Manager translations

To add a media gateway

1. At the SAT prompt, type add media-gateway <number>

where <number> is the gateway number from 1 to n. (n is 50 for an S8300, 5 for an S8400,

and 250 for an S8500 or S8700-series Media Server).

The S8300 displays the Media Gateway screen.

add survivable-processor sv-mg2-lsp Page 1 of xx

SURVIVABLE PROCESSOR - PROCESSOR ETHERNET

Node Name: sv-mg2-lsp

IP Address: 128.256.173.101

Type: LSP

Network Region: 1

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 767 768

Comments to this Manuals

No comments

Avaya G700 User Manual Page 189

Comments to this Manuals

Related products and manuals for Networking Avaya G700