Avaya Configuring Data Encryption Services User Manual download pdf (Page 44)

Configuring Data Encryption Services

3-16 117386-A Rev. A

2. Select the WEP protocol.

3. Enter the NPK.

You need to do this once for each router or conﬁguration ﬁle.

After you enter the NPK, the remaining parameters become available. If you

are editing a conﬁguration ﬁle that you created during a previous session, you

must enter exactly the same NPK that you used before.

Site Manager Path

You do this System responds

1. Select a port to conﬁgure for Frame Relay. The Add Circuit window opens.

2. Click on OK. The WAN Protocols window opens.

3. Select Frame Relay and click on OK. The Select Protocols window opens.

4. Scroll down to select WEP. You can also

select other protocols. Click on OK.

You return to the Conﬁguration Manager.

Site Manager Path

You do this System responds

1. In the Conﬁguration Manager window,

select Protocols > Frame Relay > Services.

The Frame Relay Service List window

opens.

2. Click on PVCs. The FR PVC List window opens.

3.Click on Add. The FR PVC Add window opens.

4. Enter a DLCI number. Refer to

Conﬁguring

Frame Relay Services

for instructions. Click

on OK.

You return to the FR PVC List window.

5. Select the Node Protection Key parameter.

Click on Values.

The NPK Values that you generated

previously appear in the WEP NPK

window.

6. Highlight the NPK that you want to assign to

this router. Click on Conﬁrm.

The value appears in the Node Protection

Key parameter box.

7. Click on Apply. You have entered an NPK. The Frame

Relay PVC List window remains open.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 61 62

No comments

Avaya Configuring Data Encryption Services User Manual Page 44