Avaya T7406E Configuration Guide download pdf (Page 13)

T7406E Cordless Handset Installation and Configuration Guide

Chapter 2

Introduction

The following topics are covered in this chapter:

• Specifications

• Installation considerations

• Handset overview

• Handset features

• Programming mode menus

• Battery pack overview

• Base station overview

• Additional components

• Battery charge controller

• Firmware upgrade components

The T7406E connects to the Nortel KSU. Up to four lines run from the KSU to the T7406E base

station. Each base station, of which there can be a maximum of two within 10 meters of each other,

can accommodate a maximum of four handsets. The handset IDs (1, 2, 3, 4) correspond to lines 1,

2, 3, and 4 from the KSU.

The handset features are easy to set up using the function key and menus.

Specifications

The T7406E is a frequency-hopping spread spectrum (FHSS) cordless telephone. The base station

connects to the Nortel KSU (Norstar, CICS and MICS, and BCM systems). The benefits of this

technology are: improved range, robustness, and less susceptibility to interference, fading, and

multipath. The following table highlights the main physical specifications of the T7406E

equipment.

Frequency band 2.4 GHz ISM band

Total channel capability Frequency-hopping spread spectrum (FHSS) available on 90 channels for

each base.

Handset dimensions Length: 140 mm (5.5 in.)

Width: 57 mm (2.25 in.)

Overall thickness: 40 mm (1.60 in.)

Channel spacing 864 KHz

Time slots 4 transmit and 4 receive time slots

Handset range 350 m (1000 ft), for outdoor direct line-of-sight

Handset weight 280 g/9.38 oz. (with battery pack)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

No comments

Avaya T7406E Configuration Guide Page 13