Avaya T7406E Configuration Guide download pdf (Page 18)

18 Chapter 2 Introduction

NN40110-301NN40110-301

Office with adjacent yard area(s)

• Various small businesses

• are typical office facilities with 465 to 929 square

meters (5 000 to 10 000 square feet) of floor space

• have adjacent open space or a yard next to office

•radio transmission is relatively unimpaired in more

open environments because there are fewer path

losses caused by barriers, such as walls

This environment can allow for

base-station-to-handset ranges in excess of 95 m

(300 feet).

Unsuitable environments

Large campuses (business sites with more than one building) are not a suitable application for the

T7406E.

For this type of environment, contact your authorized Nortel distributor to discuss alternatives.

Handset overview

The T7406E handset automatically links with the base station by searching for the base station

signal after you complete following tasks:

• charge the battery

• power the base station and handset

• configure the handset identification

Monitoring handset signal strength

When you move too far from the base station, the following occurs on the handset:

•the Out of range... message appears

• the handset produces an intermittent beep

• the handset goes into scanning mode

Move back into range of the base station to stop the handset display messages and warning tones.

If you go out of range during an active call, the call is automatically placed on hold. Press the

flashing red line button to retrieve a held call when you are back in range of the base station. In

cases when the line button does not light up when you move back into range of the base station,

press the intercom/line button that the call came in on to take the call off hold

95 m

(300 ft)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

No comments

Avaya T7406E Configuration Guide Page 18