Avaya Digital Mobility System Configuration Guide download pdf (Page 117)

Chapter 8 Handset registration and subscription 117

Digital Mobility System Installation and Configuration Guide

6 In the AC field, type the authentication code (optional).

The authentication code is a subscription password of max. eight digits, defined by the

technicians, and can be used when connecting the handset to the DMC. The AC is a

subscription pin code for the individual handset.

Refer to “Installation prerequisites” on page 44.

7 From the Master Handset list, select No.

8 Click Create to register the handset.

A confirmation message appears when the handset is registered.

9 Repeat steps 1 to 8 for each new handset to be registered to the system.

10 From the Main window, select the Allow Subscription check box. If not selected,

subscription mode is only active for 10 minutes after the DMC control unit has been powered

up.

11 Once the handset details have been entered into the registration screen of the DMC OAM

program, the handset can be subscribed to the system. Subscription of handsets requires the

use of each registered handset and is not to be handled through the DMC OAM program.

For more information about subscription of handsets, see “Subscribe handsets” on page 121.

This section provides information about:

• “Setting up a Master handset (registering and subscribing)” on page 117

• “Registration of additional handsets” on page 118

Note: Before subscription of the master handset and the following registration of the individual

handsets, make sure that the handsets have been fully charged prior to the registration process.

When charging the battery for the first time it is necessary to leave the handsets in the charger for

14 - 16 hours in order to secure full charging.

Setting up a Master handset (registering and subscribing)

1 Before registering a Master handset, you need to power up the DMC. Refer to “Powering up

the DMC” on page 100.

When powering up the DMC, the system automatically enters into subscription mode for 10

minutes. This is the time that is available to subscribe the first handset which automatically

becomes the Master handset.

Note: Registration of the first handset - the Master handset - is done automatically when

subscribing the handset to the system.

2 Power up the handset by pressing the HOOK-key ( ).

3 Press MENU ( ).

DM_InstallationGuide.book Page 117 Monday, September 18, 2006 6:58 AM

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 188 189

No comments

Avaya Digital Mobility System Configuration Guide Page 117