Avaya 1200 series User Manual download pdf (Page 29)

Chapter 3 29

IP Phone 1200 Series Installation

Connecting the PC Ethernet cable

Connect the PC Ethernet cable between your IP Phone and your computer to enable your

computer to access the LAN.

Procedure steps

Step Action

1 Plug one end of the PC Ethernet cable (not supplied) into the PC Ethernet

port on the back of your IP Phone marked with the

( symbol.

2 Thread the cable through the channel in the foot stand.

3 Connect the other end of the cable to the LAN port on your computer.

End

Wall-mounting the IP Phone (optional)

You can install your IP Phone on a wall. You wall-mount the IP Phone using the keyhole on the

back of the IP Phone. You do not need the foot stand for wall-mounted applications.

Procedure steps

Step Action

4 Remove the foot stand.

1 Ensure all cables are properly routed and the IP Phone is functioning.

2 Make small marks on the wall where you want to align each of the two

keyhole slots.

3 Insert the screws (not provided) so that they protrude slightly from the wall.

4 Align the keyholes on the back of the IP Phone with the screws in the wall.

5 Slide the IP Phone down on the screws to secure the IP Phone in position.

End

1 ... 28 29 30 ... 46

No comments

Avaya 1200 series User Manual Page 29