Avaya 1200 series User Manual download pdf (Page 34)

34 Chapter 4

NN40050-302

Attaching the foot stand

Attach the foot stand in the appropriate slots depending on the desired angle for your IP Phone

and expansion modules.

If you are installing your IP Phone and expansion modules on a wall, do not attach the foot

stand.

Procedure steps

Step Action

1 Align the bottom tabs on the foot stands with the position 1 slots or the

position 2 slots on the back of the expansion module and IP Phone.

2 Ensure that the tab on the expansion module foot stand is under the tab on

the IP Phone foot stand.

3 Press the foot stand into the slots until it snaps into place.

Ensure that the angle of the expansion module foot stand is equal to the angle

of the IP Phone foot stand.

In position 1 the phone sits at a 25-degree angle.

In position 2 the phone sits at a 55-degree angle.

4 Repeat this procedure for each expansion module you attach to the IP Phone.

End

Completing the installation

Connect power the IP Phone and expansion modules to complete the installation.

Procedure steps

Step Action

1 Connect power to the IP Phone.

The IP Phone and expansion modules power up.

The expansion modules use the electrical connection of the IP Phone for

power. Expansion modules do not have their own power source.

2 After you power up your IP Phone, the expansion module LEDs or LCD

display icons flash (depending on expansion module type), until

communication with the IP Phone is established.

End

1 ... 33 34 35 ... 46

No comments

Avaya 1200 series User Manual Page 34