Avaya 1200 series User Manual download pdf (Page 32)

32 Chapter 4

NN40050-302

Installing the expansion module

Procedure steps

Step Action

1 Remove power from the IP Phone.

2 Remove the IP Phone from the foot stand.

3 At the back of the IP Phone, remove the rubber plug from the accessory

expansion module (AEM) port.

Figure 10 Connect the expansion module to the IP Phone

4 Plug the 10-pin cable from the expansion module into the AEM port on the

IP Phone (or expansion module).

Align the red line on the cable with the triangular mark next to the AEM port.

5 Place the connecting arm of the expansion module behind the IP Phone.

6 Align the expansion module connecting tabs with the connecting slots on the

back of the IP Phone.

CAUTION

Risk of damage to equipment

To avoid damaging the equipment, remove the power (PoE cable or local

power) from the IP Phone before you connect the expansion module.

Expansion module

Wall-mounted slot

AEM port

10-pin cable

1 ... 31 32 33 ... 46

No comments

Avaya 1200 series User Manual Page 32