Avaya B5800 User Manual Page 230

  • Download
  • Add to my manuals
  • Print
  • Page
    / 342
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 229
Using the upgrade wizard
About this task
Before using the upgrade wizard, be sure you have a current backup of the system
configuration. See
Creating a backup of the system configuration on page 229 for more
information.
Procedure
1. Start Manager.
2. Select File > Advanced > Upgrade.
The UpgradeWiz scans for B5800 Branch Gateway modules using the address
specified in the Unit/Broadcast Address field.
3. If the expected control units are not shown, adjust the address in the Unit/
Broadcast Address field, and click Refresh.
The current version of each B5800 Branch Gateway .bin file held in the control units
memory is displayed. This is regardless of whether that .bin file is currently being
used by any module in the system.
In the Available column, Manager lists the versions of software it has available. If
Manager detects that there is a higher version available, the check box for that row
is automatically selected.
4. Click the check box for the modules you want to upgrade.
5. Click the check box for Validate.
When this option is selected, the upgrade wizard checks the amount of free RAM
memory available in the control unit to temporarily store the new bin files. If
insufficient memory is available, you will be prompted whether to continue with an
off-line upgrade or cancel upgrading. If offline is selected, the system is rebooted
into offline mode. It may be necessary to use the Refresh option within the upgrade
wizard to reconnect following the reboot. Validate upgrade can then be attempted
again to check the amount of available RAM memory for transfer of bin files. If the
memory is still insufficient, the option is offered to either do an unvalidated upgrade
or cancel.
During a validated upgrade, the bin files required are transferred to the system and
stored in temporary memory. The backup system files and upload system files
actions are performed. Once all file transfers are completed, the upgrade wizard
promps whether it is okay to proceed with the upgrade process. Select Yes to
continue. Each module being upgraded will delete its existing core software, restart
and load the new software file that was transferred. This process may take several
minutes for each unit.
6. Select the following options as appropriate:
Additional installation and system procedures
230 Implementing the Avaya B5800 Branch Gateway November 2011
Page view 229
1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 341 342

Comments to this Manuals

No comments