Avaya G700 User Manual download pdf (Page 569)

100

101

Administer Communication Manager

Issue 9.1 June 2006 569

Administering an S8300 primary controller

This document covers only the administration of Communication Manager required for the

G700 media gateway to communicate with the primary controller over a customer’s network.

For the majority of administration required, see Administrator Guide to Avaya Communication

Manager, 03-300509, or Administration for Network Connectivity for Avaya Communication

Manager, 555-233-504.

In this section, you will use the SAT interface to:

● Assigning Node Names and IP Addresses for the LSPs

● Administering Network Regions

● Associating LSPs with Network Regions

● Administering IP Interfaces

● Identifying the Survivable Processor on the primary controller

CAUTION:

CAUTION: Before continuing, be sure you have saved translations in Communication

Manager.

Begin by resetting the system.

To reset the System

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP

address of 192.11.13.6.

2. Log in, and open a SAT session (type sat or dsat).

3. At the SAT prompt, type reset system 4

The system reboots.

4. After the reboot is complete, telnet to the S8300, login, and open a SAT session.

Assigning Node Names and IP Addresses for the LSPs

If the S8300 network configuration includes LSPs, they must be specified on the Node Names

screen.

To assign node names

1. At the S8300 SAT prompt, type change node-names ip to open the Node Names

screen.

1 2 ... 564 565 566 567 568 569 570 571 572 573 574 ... 767 768

Comments to this Manuals

No comments

Avaya G700 User Manual Page 569

Comments to this Manuals

Related products and manuals for Networking Avaya G700