Avaya R2 Installation Guide download pdf (Page 26)

Introduction

Chapter 1

What You Need on Your PC 1-9

What You Need on Your PC 1

To install BCMS Vu Software R2, you must have at least the following

hardware and software:

For the

BCMS Vu

Server PC 1

❐ A single-processor Pentium

❐ Windows NT 4.0 Server or Workstation with Service Pack 4 installed on

the PC.

❐ 64 MB of main memory

❐ Up to 500 MB (512,000 KB) of disk space

❐ A double-speed CD-ROM drive.

❐ Either of the following:

— One external serial port for the data module if you are connecting to

a DEFINITY ProLogix, or a DEFINITY G3V4, R5 or later, system

— A Network Interface Card (NIC), for TCP/IP LAN connectivity, if

you are connecting to a DEFINITY ONE system.

❐ You may need other unused serial ports:

*For splits/skills, agents, VDNs and trunk groups measured by BCMS, the

following formula is an approximate guide to the space required in

megabytes for each day’s historical data when the interval measured is an

hour. (When the interval is half-hour, use 185 instead of 370 in the formula.)

# splits/skills + # agents + # trunk groups + #VDNs

(370) * BCMS interval in hours

Note

If you install the software from a remote network drive, the

machine on which the software is installed (either Server,

Client, or Wallboard) does not need a CD-ROM drive.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 146 147

No comments

Avaya R2 Installation Guide Page 26